Prof. Dr.-Ing.  Mike Barth

Prof. Dr.-Ing. Mike Barth

  • Fritz-Haber-Weg 1
    Geb. 30.33 
    76131 Karlsruhe

     

     

Prof. Dr.-Ing. Mike Barth

Lebenslauf

01.10.2022 - heute
Inhaber der Professur für Vernetzte sichere Automatisierungstechnik am Institut für Regelungs- und Steuerungssysteme (IRS)

2018 - 2023
Wissenschaftlicher Chefredakteur atp magazin

2013 - 2022
Professor im Bereich Informationstechnik an der HS Pforzheim

  • Entwicklung von Blended-Learning-Konzepten zur hybriden Lehre
  • Aufbau der Studien- und Prüfungsordnung sowie der Labore für die digitale Entwicklung & Automatisierung von Maschinen und Anlagen
  • Konzeption und Aufbau eines neuen Masterstudiengangs für die modellbasierte Entwicklung mechatronischer Systeme
  • Mehrere Industriekooperationen im Bereich Industrie 4.0 und CPS

2011 - 2013   
Forscher im ABB-Forschungszentrum Ladenburg

  • Abteilung Industrial Software & Applications - Gruppe I3: Engineering
  • 2011: Projektleiter im Bereich der virtuellen Inbetriebnahme
  • 2012 - 2013: Projektleiter Big-Bet "Active Sites" - Modellbasierte Energieoptimierung und -automatisierung von Industriestandorten
  • Nebenberuflicher Dozent an der Hochschule Pforzheim

2011
Promotion an der Helmut-Schmidt-Universität / Universität der Bundeswehr Hamburg
„Automatische Generierung von Simulationsmodellen für den Steuerungstest“ auf Basis von Anlagen-
informationsmodellen

2008 - 2011
Wissenschaftlicher Mitarbeiter am Institut für Automatisierungstechnik
bei Prof. Dr.-Ing. Alexander Fay der Helmut-Schmidt-Universität / Universität der Bundeswehr Hamburg

2006 - 2008   
Masterstudium (M.Sc.) der Produktentwicklung an der HS Pforzheim

2002 - 2006
Diplomstudium Dipl.-Ing. (FH) Maschinenbau an der HS Pforzheim

 

Gremien

 

Lehre
Lehrstuhl Titel Typ ECTS Semester
IRS-VSA Vorlesung (V) 2 WS 23/24
IRS-VSA Vorlesung (V) 4 SS 2024
IRS-VSA Vorlesung (V) 3 SS 2024
IRS-VSA Vorlesung 4 WS 23/24
IRS-VSA Lecture 4 WS 23/24
IRS-VSA Lecture 4 SS 2024

Publikationen


2024
Vorträge
Konzeptionelle Erweiterung bestehender Informationsmodelle für PCC Modelle in Soft Robotics
Witucki, L.; Barth, M.
2024, Februar 21. 58. Regelungstechnisches Kolloquium (2024), Boppard, Deutschland, 21.–23. Februar 2024
2023
Dissertationen
Zeitschriftenaufsätze
Security im Kontext des Module Type Package
Madsen, M.; Palmin, A.; Stutz, A.; Maurmaier, M.; Barth, M.
2023. atp Magazin
Automatisierungsdienste-Choreografien in der Prozessindustrie – Evaluation anhand zweier Anwendungen in der modularen Produktion
Stutz, A.; Maurmaier, M.; Eckert, M.; Barth, M.; Blumenstein, M.; Fay, A.
2023. atp magazin, 65 (6-7), 62–73. doi:10.17560/atp.v65i6-7.2665
Proceedingsbeiträge
Institutionelle Rollen im Lebenszyklus von Simulationsmodellen mit Fokus auf Engineering und Anwendung
Barth, M.; Ristic, M.; Jäkel, J.
2023. Automation 2023 – Transformation by Automation, Baden-Baden, 27th-28th June 2023, 429 – 442, VDI Verlag. doi:10.51202/9783181024195-429
Security Analysis of the Module Type Package Concept
Madsen, M.; Palmin, A.; Stutz, A.; Barth, M.
2023. 2023 IEEE 21st International Conference on Industrial Informatics (INDIN), Lemgo, Germany, 17-20 July 2023, 1–8, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/INDIN51400.2023.10218151
Institutionelle Rollen im Lebenszyklus von Simulationsmodellen mit Fokus auf Engineering und Anwendung
Barth, M.; Ristic, M.; Jäkel, J.
2023. Automation 2023: transformation by automation. 24. Leitkongress der Mess- und Automatisierungstechnik, 429–442, VDI Verlag
A role-based Metric to determine the Quality of Simulation Models
Barth, M.; Ristic, M.; Jäkel, J.
2023. 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA), 1–8, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA54631.2023.10275698
Automation Service Choreographies using Decentralized Orchestration to Integrate Non-Choreography-Enabled Equipment Assemblies
Stutz, A.; Fay, A.; Barth, M.; Maurmaier, M.
2023. IEEE International Conference on Industrial Informatics (INDIN), Institute of Electrical and Electronics Engineers (IEEE)
Security Analysis of the Module Type Package
Madsen, M.; Palmin, A.; Stutz, A.; Barth, M.
2023. IEEE International Conference on Industrial Informatics (INDIN), Institute of Electrical and Electronics Engineers (IEEE)
2022
Proceedingsbeiträge
A Methodology for classifying Data relevance to utilize external Data Sources in the Digital Twin
Hildebrandt, G.; Habiger, P.; Dittler, D.; Barth, M.; Drath, R.; Weyrich, M.
2022. Proceedings of the 27th IEEE International Conference on Emerging Technologies and Factory Automation, 6th - 9th September 2022, Stuttgart, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA52439.2022.9921717
Coordination of Modular Packaging Lines Using Automation Service Choreographies
Blumenstein, M.; Stutz, A.; Fay, A.; Barth, M.; Maurmaier, M.
2022. 27th International Conference on Emerging Technologies and Factory Automation, ETFA 2022, 6th - 9th September 2022, Stuttgart, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA52439.2022.9921609
Anwendung von Automatisierungsdienste-Choreografien zur Koordination modularer Logistiklinien
Stutz, A.; Blumenstein, M.; Fay, A.; Barth, M.; Maurmaier, M.
2022. 17. Fachtagung EKA 2022 - Entwurf Komplexer Automatisierungssysteme: Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen. Hrsg.: Ulrich Jumar, Christian Diedrich, Institut für Automation und Kommunikation (ifak)
Plug & Produce im real-virtuellen Kontext fertigungstechnischer heterogener Anlagen
Habiger, P.; Hildebrandt, G.; Drath, R.; Barth, M.; Fay, A.; Zor, A.; Marseu, M.
2022. Tagungsband AALE 2022 : Wissenstransfer im Spannungsfeld von Autonomisierung und Fachkräftemangel. Hrsg.: Christian Härle, Jens Jäkel, Guido Sand, Hochschule für Technik, Wirtschaft und Kultur Leipzig (HTWK). doi:10.33968/2022.03
Virtualisierungsarchitektur für heterogene CAx-Tools im Engineering modularer Produktionssysteme
Hildebrandt, G.; Habiger, P.; Drath, R.; Barth, M.
2022. Tagungsband AALE 2022 : Wissenstransfer im Spannungsfeld von Autonomisierung und Fachkräftemangel. Hrsg.: Christian Härle, Jens Jäkel, Guido Sand, Hochschule für Technik, Wirtschaft und Kultur Leipzig (HTWK). doi:10.33968/2022.18
2021
Zeitschriftenaufsätze
Comparison and alignment of OPAS and MTP concepts
Blumenstein, M.; Stutz, A.; Maurmaier, M.; Barth, M.; Fay, A.
2021. atp Magazin, 10-2021, 62–69. doi:10.17560/atp.v63i10.2560
Effiziente Navigation durch die Topologie industrieller Prozessanlagen
Berlet, A.; Rückert, J.; Koziolek, H.; Drath, R.; Barth, M.
2021. atp Magazin, 63 (10), 76–83. doi:10.17560/atp.v63i10.2569
Die aktuelle und zukünftige Nutzung von Simulation
Bruckner, L.; Rosen, R.; Barth, M.; Urbas, L.; Jäkel, J.
2021. atp Magazin, 2021 (4), 64–73. doi:10.17560/atp.v63i04.2533
Eine systematische Bewertung der Qualität von Simulationsmodellen
Barth, M.; Rosen, R.; Kübler, K.; Ristić, M.; Heinzerling, T.; Scheifele, C.
2021. atp Magazin, 2021 (4), 57–63. doi:10.17560/atp.v63i04.2537
Modellierung und Simulation von Automatisierungsgeräten
Habgier, P.; Draht, R.; Barth, M.; Heinzerling, T.
2021. atp Magazin, 2021 (06/07), 66–73. doi:10.17560/atp.v63i6-7.2545
Proceedingsbeiträge
Betriebsparallele Adaption einer Co-Simulation für diskrete Fertigungsanlagen
Härle, C.; Barth, M.; Fay, A.
2021. Automation 2021, 517–534, VDI Verlag. doi:10.51202/9783181023921-517
Vergleich und Zusammenführung des Open Process Automation Standard (OPAS) und der VDI/VDE/NAMUR 2658
Blumenstein, M.; Stutz, A.; Maurmaier, M.; Barth, M.; Fay, A.
2021. Automation 2021 : 22. Leitkongress Mess- und Automatisierungstechnik : navigating towards resilient production, 29. und 30. Juni 2021, 261–274, VDI Verlag. doi:10.51202/9783181023921-261
Software Patterns for the Realization of Automation Service Choreographies
Stutz, A.; Barth, M.; Fay, A.; Maurmaier, M.
2021. 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) : proceedings : Västerås, Sweden - online, 07-10 September, 2021, Art.Nr.: 175001, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA45728.2021.9613201
Operation-parallel adaptation of a co-simulation for discrete manufacturing plants
Härle, C.; Barth, M.; Fay, A.
2021. 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) : proceedings : Västerås, Sweden - online, 07-10 September, 2021, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA45728.2021.9613719
TOPNAV: Efficiently Navigating through Industrial Process Plant Topologies
Berlet, A.; Rückert, J.; Koziolek, H.; Drath, R.; Barth, M.
2021. 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), proceedings : Västerås, Sweden - online, 07-10 September, 2021, Art.Nr.: 21466889, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA45728.2021.9613698
2020
Zeitschriftenaufsätze
Orchestration vs. Choreography Functional Association for Future Automation Systems
Stutz, A.; Fay, A.; Barth, M.; Murmaier, M.
2020. IFAC-PapersOnLine, 53 (2), 8268–8275. doi:10.1016/j.ifacol.2020.12.1961
Intermodulare funktionale Sicherheit für flexible Anlagen in der Prozessindustrie
Klose, A.; Pelzer, F.; Drath, R.; Horch, A.; Vélez Leon, S.; Manske, H.; Kotsch, C.; Oehlert, R.; Knab, J.; Barth, M.; B., G.; L., U.
2020. atp Magazin, 44–53. doi:10.17560/atp.v62i10.2508
Intermodulare funktionale Sicherheit für flexible Anlagen: Teil 1Grundlagen und Anforderungen
Pelzer, F.; Klose, A.; Barth, M.; Manske, H.; Oehlert, R.; León, S. V.; Horch, A.; Knab, J.; Gut, B.; Drath, R.; Urbas, L.
2020. atp Magazin, 84–92. doi:10.17560/atp.v62i6-7.2488
Proceedingsbeiträge
Eine systematische Bewertung der Qualität von Simulationsmodellen für die Automatisierungstechnik
Barth, M.; Kübler, K.; Heinzerling, T.; Rosen, R.; Jäkel, J.
2020. Automation 2020: 21. Leitkongress Mess- und Automatisierungstechnik : shaping automation for our future, 30. Juni und 01. Juli 2020, 499–516. doi:10.51202/9783181023754-499
Choreographies in Microservice-Based Automation Architectures
Stutz, A.; Fay, A.; Barth, M.; Maurmaier, M.
2020. 3rd IEEE International Conference on Industrial Cyber-Physical Systems, 10th-12th June 2020, 411–416, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICPS48405.2020.9274719
Distributed Functional Safety for Modular Process Plants
Klose, A.; Pelzer, F.; Barth, M.; Drath, R.; Oehlert, R.; Vélez Leon, S.; Horch, A.; Gut, B.; Knab, J.; Manske, H.; Urbas, L.; Kotsch, C.
2020. 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2020), Vienna, Austria, 8th -11th September 2020 : proceedings, 1381–1384, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA46521.2020.9212037
Assistance system for the automated composition and configuration of a Co-Simulation
Härle, C.; Barth, M.; Fay, A.
2020. The 34th Annual European Simulation and Modelling Conference 2020, 21st-23rd October 2020, LAAS Toulouse, 155–162, The European Multidisciplinary Society for Modelling and Simulation Technology (EROSIS-ETI)
Forschungsberichte/Preprints
Simulation und digitaler Zwilling im Anlagenlebenszyklus
Rosen, R.; Jäkel, J.; Barth, M.; Stern, O.; Schmidt-Vollus, R.; Heinzerling, T.; Hoffmann, P.; Richter, C.; Puntel-Schmidt, P.; Scheifele, C.; K., K.; M., R.
2020. VDI Verlag
2019
Proceedingsbeiträge
Simulation und Digitaler Zwilling im Engineering und Betrieb automatisierter Anlagen
Rosen, R.; Jäkel, J.; Barth, M.; Stern, O.; Schmidt-Vollus, R.; Heinzerling, T.; Hoffmann, P.; Richter, C.; Puntel-Schmidt, P.; Scheifele, C.
2019. Automation 2019: 20. Leitkongress der Mess- und Automatisierungstechnik : Autonomous Systems and 5G in Connected Industries : Baden-Baden, 02. und 03. Juli 2019, 531–544, Verein Deutscher Ingenieure - Gesellschaft Verfahrenstechnik und Chemieingenierurwesen (VDI-GVC)
Hybride Modellierung und verteilte Multi-Agenten zur Co-Simulation auf Einplatinen-Computern
Härle, C.; Barth, M.; Fay, A.
2019. Tagungsband AALE 2019 : autonome und intelligente Systeme in der Automatisierungstechnik : 16. Fachkonferenz, 28. Februar-1. März 2019, Heilbronn. Ed.: Benedict Bauer, 69–77, VDE Verlag
2018
Buchaufsätze
Herausforderungen der Produktentwicklung Digitalisierung
Barth, M.
2018. W. Engeln (Hrsg.), Hrsg.: Engeln, Werner, 239, Vulkan-Verlag
Zeitschriftenaufsätze
Proceedingsbeiträge
Process simulation on single-board computers
Härle, C.; Barth, M.; Fay, A.
2018. 14th IEEE Conference on Automation Science and Engineering (CASE 2018), 20.-23. August 2018, München. General chair: Birgit Vogel-Heuser, Art.Nr.: 143427, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/COASE.2018.8560426
Modelica-basierte Embedded-Simulation – Einplatinenrechner als Plattform für modellbasiertes Engineering
Härle, C.; Barth, M.; Fay, A.
2018. Entwurf komplexer Automatisierungssysteme : EKA 2018 : Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen : 02. bis 03. März 2018 in Magdeburg : 15. Fachtagung mit Workshop. Hrsg.: Ulrich Jumar, Institut für Automation und Kommunikation (ifak)
2017
Zeitschriftenaufsätze
Virtuelle Wasserfahrt eines Batchreaktors: Erfahrungsbericht zu Aufbau und Erprobung der Simulation
Zindl, V.; Lotz, P.; Barth, M.; Oppelt, M.
2017. Atp-Edition, 59 (4), 48–58
Der virtuelle Zwilling im digitalen Anlagenbau
Barth, M.; Sand, G.
2017. Industrie 4.0 Management, 33 (02-2017), 7–10
Virtuelle Inbetriebnahme systematisch einführen
Barth, M.
2017. atp Magazin, 59 (7-8), 16–22
Proceedingsbeiträge
Möglichkeiten des Einsatzes von Single-Board-Computern im technischen Studium
Buch, A.; Barth, M.
2017. Tagungsband AALE 2017: das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft : 14. Fachkonferenz, 2.-3. März 2017 in Wildau Angewandte Automatisierungstechnik in Lehre und Entwicklung, 2017, 283–286, VDE Verlag
Workflow zur Einführung der Virtuellen Inbetriebnahme im Engineering von Automatisierungssystemen
Barth, M.; Stern, O.; Iffländer, B.; Jäkel, J.; Schumann, R.; Schmidt-Vollus, R.; Schulze, R.; Richter, C.; Hoernicke M.; Hundt, L.
2017. V. GMA (Hrsg.), Automation 2017: technology networks processes : 18. Leitkongress der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 27. und 28. Juni 2017, 43–44, VDI Verlag
2016
Proceedingsbeiträge
Modularisierung am Beispiel einer verfahrenstechnischen Modellanlage
Barth, M.
2016. Tagungsband AALE 2016 : Automatisierung im Fokus von Industrie 4.0 : 13. Fachkonferenz, Lübeck, 23–32, Deutscher Industrieverlag GmbH (DIV)
Simulation 2025: Simulation im Lebenszyklus industrieller Anlagen
Oppelt, M.; Hoernicke, M.; Rosen, R.; Urbas, L.; Barth, M.
2016. Automation 2016 : secure & reliable in the digital world : 17. Branchentreff der Mess- und Automatisierungstechnik : Baden-Baden, 07. und 08. Juni 2016, VDI Verlag
2015
Zeitschriftenaufsätze
Modularisierung von Produktionsanlagen und deren Bedeutung für die Automatisierungstechnik
Barth, M.
2015. Forschungsreport ... für die Elektrotechnik in Baden-Württemberg, WS 2015/2016, 26–29
Simulation im Lebenszyklus einer Prozessanlage
Oppelt, M.; Wolf, G.; Barth, M.; Urbas, L.
2015. atp edition - Automatisierungstechnische Praxis, 57 (09), 46 59. doi:10.17560/atp.v57i09.526
Engineering-Workflow-Cockpit
Gutermuth, G.; Cohen, A.; Barth, M.
2015. ATP - Automatisierungstechnische Praxis, 57 (3), 48–59
Proceedingsbeiträge
Virtuelle Inbetriebnahme - Forschung und Lehre mithilfe einer Modellanlage
Barth, M.; Franz, N.; Greiner, T.
2015. 12. AALE-Konferenz 2015 „Automatisierung im Fokus von Industrie 4.0“, 5. - 6. März 2015, Jena
Die Rolle von Simulation im Lebenszyklus einer Prozessanlage - Ergebnisse einer globalen Umfrage zur aktuellen und zukünftigen Nutzung
Oppelt, M.; Barth, M.; Urbas, L.
2015. Automation 2015 : benefits of change - the future of automation ; 16. Branchentreff der Mess- und Automatisierungstechnik ; Kongresshaus Baden-Baden, 11. und 12. Juni 2015, 691–706, VDI Verlag
Methoden und Modelle der Virtuellen Inbetriebnahme
Barth, M.; Puntel-Schmidt, P.; Hoernicke, M.; Oppelt, M.; Wolf, G.; Hundt, L.; Stern, O.
2015. Automation 2015 : benefits of change - the future of automation ; 16. Branchentreff der Mess- und Automatisierungstechnik ; Kongresshaus Baden-Baden, 11. und 12. Juni 2015, VDI Verlag
Cloud-basierte Fertigungsautomatisierung als Basis zur Realisierung zentraler Industrie 4.0-Konzepte - Systemarchitektur eines webservice-basierten Steuerungssystems in der Cloud
Engel, G.; Greiner, T.; Barth, M.; Gorecky, D.
2015. Automation 2015 : benefits of change - the future of automation ; 16. Branchentreff der Mess- und Automatisierungstechnik ; Kongresshaus Baden-Baden, 11. und 12. Juni 2015, 569–580, VDI Verlag
Enabling the integrated use of simulation within the life cycle of a process plant: an initial roadmap
Oppelt, M.; Graube, M.; Barth, M.; Urbas, L.
2015. IEEE 13th International Conference on Industrial Informatics (INDIN) : 22th - 24th July 2015, Robinson College, Cambridge, United Kingdom, 49–55, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/INDIN.2015.7281709
Virtual Plants for Brown-Field Projects: automated generation of simulation models based on existing engineering data
Hoernicke, M.; Fay, A.; Barth, M.
2015. IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA) : 8 - 11 Sept. 2015, City of Luxembourg, Luxembourg, 473–480, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA.2015.7301462
Forschungsberichte/Preprints
2014
Zeitschriftenaufsätze
Aus der Vorlesung in die Labors
Barth, M.
2014. Konturen : die Hochschulzeitschrift / Hochschule Pforzheim, 101–103
Forschungsberichte/Preprints
Industrie 4.0 an der Hochschule Pforzheim
Barth, M.
2014. Hochschule Pforzheim
2013
Zeitschriftenaufsätze
Automated generation of simulation models for control code tests
Barth, M.; Fay, A.
2013. Control engineering practice, 21 (2), 218–230. doi:10.1016/j.conengprac.2012.09.022
Bewertung der Offenheit von Engineering-Tools
Barth, M.; Biffl, S.; Drath, R.; Fay, A.
2013. Assembly automation, 15 (4), 12–16
Proceedingsbeiträge
A method to evaluate the openness of automation tools for increased interoperability
Barth, M.; Fay, A.; Biffl, S.; Winkler, D.
2013. IECON 2013: 39th annual conference on IEEE Industrial Electronics Society, 10th - 13th November 2013, Vienna, Austria, 6844–6849, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IECON.2013.6700266
Wie der Umgang mit unterschiedlichen Datenmodellen beim Datenaustausch im heterogenen Werkzeugumfeld gelingt
Barth, M.; Draht, R.
2013. Automation 2013: 14. Branchentreff der Mess- und Automatisierungstechnik ; [Kongresshaus Baden-Baden,] 25. und 26. Juni 2013, 339–343, VDI Verlag
2012
Zeitschriftenaufsätze
Offenheitsmetrik für Engineering-Werkzeuge: Die Fähigkeit zur Interoperabilität bewerten
Barth, M.; Draht, R.; Fay, A.
2012. ATP - Automatisierungstechnische Praxis, 54 (9), 45–55
Simulationsbasierte Steuerungsfunktionstests - Teil 1
Barth, M.; Greifeneder, J.; Weber, P.; Fay, A.
2012. ATP - Automatisierungstechnische Praxis, 34–41. doi:10.17560/atp.v54i04.2163
Semantikvielfalt mit AutomationML beherrschen
Barth, M.; Draht, R.
2012. ATP - Automatisierungstechnische Praxis, 72 (12), 888–897. doi:10.17560/atp.v54i12.366
Simulationsbasierte Steuerungsfunktionstest - Teil 2
Barth, M.; Fay, A.; Greifender, J.; Weber, P.
2012. atp Magazin
Proceedingsbeiträge
Concept for managing multiple semantics with AutomationML - maturity level concept of semantic standardization
Barth, M.; Draht, R.
2012. IEEE 17th Conference on Emerging Technologies & Factory Automation (ETFA), 2012 : 17 - 21 Sept. 2012, Kraków, Poland, Vol. 1, 249–256, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA.2012.6489538
Evaluation of the openness of automation tools for interoperability in engineering tool chains
Barth, M.; Drath, R.; Fay, A.; Zimmer, F.
2012. Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012), 17th-21st September 2012, Kraków, Poland, 8 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA.2012.6489542
Bewertung der Fähigkeit von Engineering-Werkzeugen zur Interoperabilität mit Hilfe einer Offenheitsmetrik
Barth, M.; Fay, A.; Drath, R.; Zimmer, F.
2012. Automation 2012: der 13. Branchentreff der Mess- und Automatisierungstechnik, Kongress Baden-Baden, 13. und 14. Juni 2012, VDI Verlag
Vollständiger Test des Automatisierungssystems - Domänenübergreifende Integration heterogener Hardware-Emulatoren in einem virtuellen Framework
Barth, M.; Hoernicke, M.; Greifeneder, J.
2012. Automation 2012: 13. Branchentreff der Mess- und Automatisierungstechnik, Kongresshaus Baden-Baden, 13. und 14. Juni 2012, 75–88
2011
Zeitschriftenaufsätze
Interoperabilität von Engineering-Werkzeugen
Barth, M.; Fay, A.; Drath, R.
2011. Assembly automation, 59 (7), 451–460. doi:10.1524/auto.2011.0938
Proceedingsbeiträge
Integration und Anwendung von objektorientieren Simulationsmodellen in AutomationML
Barth, M.; Moritz, N.; Graeser, O.; Niggemann, O.
2011. Automation 2011: der 12. Branchentreff der Mess- und Automatisierungstechnik, Kongress Baden-Baden, 28. und 29. Juni 2011, 37–40, VDI Verlag
Concept for interoperability between independent engineering tools of heterogeneous disciplines
Barth, M.; Draht, R.
2011. IEEE 16th Conference on Emerging Technologies & Factory Automation (ETFA), 2011 : Toulouse, France, 5 - 9 Sept. 2011, 339–346, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA.2011.6058975
2010
Zeitschriftenaufsätze
Proceedingsbeiträge
Erfahrungen im Umgang mit der Modelica-Fluid-Bibliothek auf dem Gebiet der Prozessautomatisierung
Barth, M.; Fay, A.
2010. ASIM-Treffen 2010 der Fachgruppen : Simulation technischer Systeme (STS), Grundlagen und Methoden in Modellbildung und Simulation (GMMS) ; 4. -5. März 2010 in Ulm ; Tagungsband. Ed.: Walter Commerell, 60–67, Hochschule Ulm
Automatische Generierung von objektorientierten Simulationsmodellen für die Unterstützung des PLS-Test-Engineerings
Barth, M.; Fay, A.
2010. Entwurf komplexer Automatisierungssysteme : EKA 2010 ; Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen ; 11. Fachtagung mit Tutorium, 25. bis 27. Mai 2010 in Magdeburg, Denkfabrik im Wissenschaftshafen / ifak, Institut für Automation und Kommunikation e.V., Magdeburg; Otto-von-Guericke-Universität Magdeburg, Institut für Automatisierungstechnik. Hrsg.: Ulrich Jumar, 741–750, Institut für Automation und Kommunikation (ifak)
Efficient use of data exchange formats in engineering projects by means of language integrated queries — Engineers LINQ to XML
Barth, M.; Fay, A.
2010. IECON 2010 : 36th annual conference on IEEE Industrial Electronics Society ; Glendale, Arizona, USA, 7 - 10 November 2010 ; [proceedings], Art.Nr.: 5675490. doi:10.1109/IECON.2010.5675490
Software-gestütztes CAE-/PLS-Konfigurationswerkzeug für die bidirektionale Nutzung von Signallisten im PLT-Engineering
Barth, M.; Fay, A.
2010. Automation 2010: der 11. Branchentreff der Mess- und Automatisierungstechnik ; Kongress Baden-Baden, 15. und 16. Juni 2010, S. 405–409, VDI Verlag
Effizienter Einsatz Simuations-basierter Tests in der Entwicklung automatisierungstechnischer Systeme
Barth, M.; F., W.; G., F.; A., F.
2010. Automation 2010 : der 11. Branchentreff der Mess- und Automatisierungstechnik ; Kongress Baden-Baden, 15. und 16. Juni 2010 / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik
2009
Proceedingsbeiträge
Semiautomatisch generierte Element- und Prozesssimulationsmodelle für PLS-Tests
Barth, M.; Weber, P.; Fay, A.; Greifeneder, J.
2009. Automation 2009 : der Automatisierungskongress in Deutschland ; Kongress Baden-Baden, 16. und 17. Juni 2009 ; [10. Branchentreff der Mess- und Automatisierungstechnik], 24–25, VDI Verlag
Modellierungstiefen in der Automatisierungstechnik am Beispiel der Prozessindustrie
Barth, M.; Fay, A.
2009. Tagungsband / ASIM-Treffen STS/GMMS 2009, Treffen der ASIM/GI-Fachgruppen STS und GMMS - DASS 2009, Dresdner Arbeitstagung Schaltungs- und Systementwurf : 5. - 6. März 2009 in Dresden. Hrsg.: Günter Elst, 101–107, Fraunhofer IRB Verlag
Modellbasierte Prozesssimulation für Steuerungstests auf Excel-Basis
Barth, M.; Weber, P.; Fay, A.; Greifeneder, J.
2009. VDI/VDE-Tagung Mechatronik 2009, 12. und 13. Mai 2009, Wiesloch bei Heidelberg, VDI Verlag
Object-oriented engineering data exchange as a base for automatic generation of simulation models
Barth, M.; Strube, M.; Fay, A.; Weber, P.; Greifeneder, J.
2009. 35th Annual Conference of IEEE Industrial Electronics : IECON 2009 ; Porto, Portugal, 3 - 5 November 2009, 2465–2470, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IECON.2009.5415229